How To Lube Your Mountain Bike
A mountain bike is a lot of fun although it does require some maintenance. You should always lube your bike 15 hours or so before riding, as quick jobs right before you take off normally don’t get everything lubed. Some lube jobs will last for more rides, although if things get loud or shifting gets sticky, it’s time to lube.
Here is how to lube your bike:
The chain
Apply a generous amount of mountain bike lube to your chain as you move the pedals around backward. It also helps to find a spot to steady your hand such as the frame while you move the pedals around and around. Make sure you watch out for the cranks and chain rings as they move around.
Front Derailleur
On the front derailleur, lube the pivots. Use a spot of lube everywhere you can see movement when you move the shift lever.
Rear Derailleur
Just like the front derailleur, lube the pivots.
Pedals
Some types of clipless pedals will need to have the release mechanism lubed. You should only lube this mechanism if you have this type of pedal.
Everything into motion
Pedal around, shift your gears and bounce your bike around. If you hear anything squeak, there’s a moving part there are it should be lubed immediately.
Wipe it all clean
Once you’ve lubed everything and wiped it all around, simply wipe it all backoff. Use a rag to wipe away all the lube you used, including all the lube off the chain. Wiping it away will leave the lube in between the parts but clean it away from everywhere it isn’t needed. This will keep your bike from collecting dirt while you ride.
DISCLAIMER:
This information is not presented by a medical practitioner and is for educational and informational purposes only. The content is not intended to be a substitute for professional medical advice, diagnosis, or treatment. Always seek the advice of your physician or other qualified healthcare providers with any questions you may have regarding a medical condition. Never disregard professional medical advice or delay seeking it because of something you have read.
Since natural and/or dietary supplements are not FDA-approved they must be accompanied by a two-part disclaimer on the product label: that the statement has not been evaluated by FDA and that the product is not intended to “diagnose, treat, cure or prevent any disease.”
